There are many factors while choosing a plasma cutter and one of the major worries is to buy something reasonable and up to the mark. To solve this query we have reviewed the top 5 best plasma cutter under $1000, having such features that would help you in the welding process and will make your learning process more comfortable.

After extensive research through reading tons of articles and interviews with experts, these welders are selected on the basis of their easy nature and reliability to avoid any complexities for beginners and professionals too. All of them have unique features that help in the performance of the welding and make these even more credible.

Best Plasma Cutter Under $1000 Dollar 2021

We have enlisted the top 5 best plasma cutter under $1000 in 2021 as follows:

Hobart 500564 Airforce 12ci (Best Plasma Cutter with Built-In Air Compressor 120V)

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V


  • Built-in Air Compressor
  • Advance Fan on Demand Cooling Fan
  • Diagnostic Lights
  • Cutter is Faster Than Oxy-Fuel
  • No Flame Tunning Setting Needed
  • Clean Cut 3/8″
  • Pilot Arc Start
  • Process: Plasma (PAC)
  • Heat Overload Protection


Most of the best welders cannot perform well on oxidized steel but HOBART 500564 makes it possible for you to weld it with efficiency. It is the oldest and most renowned brand to gain popularity in customers. It is the best welder for infrequent jobs thus the machine portability and durability are high.

The power source offered by this machine is both AC and DC which is best for any welding TIG and it attracts customer’s eyes too. It’s easy to use quality gives the liberty to its user for material selection and range required for thickness.

Hobart is giving you a perfect amperage range of 10A to 165 amperages with a great stability arc. It comes with a foot pedal that functions great on amperage control. Through the control, in amperage, it gives more of the output.

It has the ability to weld aluminum up to ideal thickness 3/16 with the power source of both AC and DC. The machine works more efficiently with both of them and can make it more possible for the user to do easy daily chores.


  • Built-in air compressor
  • Lightweight
  • Easy to carry
  • Only flame tuning needed
  • Warranty: 5 years
  • Weight: 21.41lb
  • Max cutting clean:3/8″
  • Leads: 12″


  • Little bit slow

Razorweld JRWPC45LT Plasma Cutter, 45 amp (Best Lightweight and Portable)

Razorweld JRWPC45LT Plasma Cutter


  • Small, Light Single Phased
  • Complete with 220V Plugin
  • Clean Cut 5/8 inch
  • Severance Cut 1 inch
  • 20 ft TRF 45 Plasma Torch
  • Preset air regulator
  • 2 years warranty
  • Weight 20.1 lbs (9.1 KG)


This small-sized plasma cutter is our last pick among the best plasma cutters under 1000, it has some extremely efficient features that are making it the most reliable and best in the market nowadays. The reasonable process and features are all that the customer is searching for and it has that grip to fulfill their desires.

This machine has the euro-connection quick release torch feature that gives the ensure of complete portability and its option to interchange the compatibility torches quickly if when needed.

There is a combination of a robust custom designed sure grip torch and through this, the machine has the ability to make the operation from cut to finish seamless. The fine cut gives the maximum output and good performance makes the work of the user even better and demanding.

The easy-to-operate feature has taken the most of the customer’s attention as in terms of settings it completes with a 2T/4T function which decreases the fatigue of the operator. It operates on a simple 20-45 amperage dial that is required that is minimum requires to alter your cutting capacity and completes the characteristic on your workspace.

The low frequency, pilot arc start guarantees reliable and consistent operator ignition without interference to adjacent electrical devices. The machine comes with a pre-set air-regulator, 19.5ft Sure-grip torch, and a return lead.


  • Small in Size
  • Extremely efficient
  • Easy to Setup
  • Single portable phase inverter
  • Operate on low amperage
  • Grip torch


  • Clamp is short

CUT-50, 50 Amp Pro. Plasma Cutter, DC Inverter 110/230V (Best 120v Plasma Cutter)

CUT-50 50 Amp Pro Plasma Cutter Review


  • Clean Cut: 1/4 inch 
  • Adapts to 100-240V automatically
  • 50 Amp Digital Air Inverter
  • Style: Air Plasma Cutter Cutting Machine
  • Metal Material
  • LCD Display


This plasma cutter is the best option among all as it has useful features that attract most of the customers towards it. The auto voltage capacity and digital qualities making it a worth taking cutter.

It has the function to generate auto voltage automatically that adapts 100-240V input power. In this, the plug adapters are included separately. The dual voltage gives the liberty to operate the machine wisely and can be able to perform heavy-duty projects.

The unique torch and gripped made design enables the fact that it has comfortable controlling features and grip factor that help it to resist the heat and other impact creating material on it.

It can handle 50 Ampere of output and has a digital air inverter plasma cutter. This cutter can facilitate the steel to cuts up to 1.0. The design of this plasma cutter is best for both industrial and construction work. It can also be used as a hobby sometimes.

Through this machine, one can easily cut different types of steel like stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials.

The best part of this machine is which can make every person to like it, even more, is its maintenance. The machine is easy most of the time to make it clean else it does not need much repair. It does not release noxious gases and its fewer hazards towards the fire. It gives clean cutting and the outlook is best for all.


  • Cut up to 50AMP
  • Compact portable design
  • 3-year extensive warranty
  • Perfect Size: Pest Repeller v.142
  • weight: 21.2 pound
  • Clean Cut up to 1/2”
  • No need to polish
  • Display: LCD digital display
  • Easy to carry
  • Cutting thickness upto 1-20mm


  • Supplied air fitting leaking setup carefully
  • Not longer ground cable

Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter  (Best Cheap Pilot Arc Plasma Cutter)

Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter


  • Non Touch Pilot Arc
  • Advanced Cooling System: PAPST
  • Installation Type: Tig Welding
  • In 50 AMP style
  • Clean Cut: 1/2 Inch Clean Cut,
  • Dual Voltage: 110/120V


This TIG welder is chosen best among all best plasma cutter under $1000 as it has a good number of reviews on amazon. Lotos LTP5000D 50Amp is able to perform multiple tasks and delivers high-quality performance. Its power output and amperage range are quite impressive to do any task competently.

Many machines do not perform well on rough and rusty surfaces but this TIG welder has the capability of cutting rough, painted, and rusty surfaces. It is designed by pilot arc technology which tolerates the cut without being tip touched to the metal.

Keeping in mind the safety and cost then it uses harmless compressed air in order to cut stainless steel, mild steel, alloy steel, copper, and aluminum. This wide range of welding uses making this TIG worth buying.  Its portable nature will allow the user to carry it anywhere to your workstation.

It gives a dual voltage of 220V/110V and it only provides DC output. It gives ½ ideal clean cut and maximum severance cut of ¾ under 220/240V at the output DC of 10-50 amperes. Also gives 1/3 ideal cut and maximum 2/5 severance cut under 110/120V at the output DC of 10-35 amperes.

This machine will get a maximum of 1 minute to get ready for usage as it has pre-installed NPT ¼ with industry type D plug and also have an air filter regulator to access quickly to your machine compressor.  This will help you to start your work in no time and deliver good performances.

The most important feature is that it has PAPST advanced cooling quality that prevents your machine from getting heat up quickly and also avoid any hindrance in your work. Its stability and durability ensure high performance in every situation.

Along with durable features, its package includes a good range of power supply, torch for plasma cutting, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, and Manual has detailed instructions, etc.


  • Non-touch pilot arc
  • Nozzle Pre-Installed
  • One year warranty
  • 10-50 A DC output
  • PAPST Advanced  Cooling System
  • Clean Cut up to 1/2”
  • Max-Severance-Thickness: 3/4″
  • Clean cutting Rusty / Painted Metal
  • Easy setup
  • Budget Friendly


  • Ground clamp to weak
  • no extra standoff
  • Only gives DC output
  • Not for heavy duty

Reboot Plasma Cutter 50 Amp (Best Plasma Cutter Under 300)

Reboot Plasma Cutter 50 Amp


  • Duty Cycle 60% at 50A
  • Medium Size
  • Slide Switch Style
  • Dust Cycle Percentage Feature
  • Stainless Steel Material
  • No Battery Required
  • Clean Cut 1/2″(12mm)


This plasma cutter is one of the best while looking for a budget. The leads are a bit short which indicates that it is not for industrial use. This is also good for home-related projects that can be settled on a low budget. The price of this machine makes it more prominent in the market and many customers opt for its first time while searching.

This machine has the capacity for anyone needing to do some cutting at home; this parts an excellent cut through 1/2″ plate and can sever 3/8″ material when needed.

It is an automatic AC 110/220 V cutter with a 60% duty cycle at 50 A, it gives 100% at 40A duty cycle air plasma cutter. The voltage transfer is easily from 110 V to 220 V in the home, air pressure is up to 60- 70psi. It has the ability to cut materials like stainless steel, alloy steel, mild steel, copper, cast iron, and chrome.

A reboot is offering 30 days money-back guarantee and it keeps the customers happy with its features which is helpful if you want to check out what it’s like without being bound to it right away after the purchase. The consumables cost much less than what other machines use, and they last a while in the machine before needing to be replaced.

This is a very economical plasma cutter and would suit any hobbyist needing a reliable machine to cut up to 1/2″ clean sections at a low price.

It comes in a package that includes 1 X 13ft PT31 Plasma Cutter Torch 1X earth clamp 6.56 ft cable 1 X Hose 6.5ft 1X Updated Air Pressure Valve 1X conversion line, No Compressor Included. All of them are great in their functions and are more prone to make the work easier for all of their customers.


  • Clean cut thickness:1/2″(12mm)
  • 30 days money-back guarantee
  • Compact design: 18.9 x 13.45 x 10.8 inches
  • Show dust cycle percentage
  • Aluminum cutting 5mm
  • Weight:21.6 pounds


  • Clamp is short
  • Heavy in size
  • No Compressor Included
  • Stuck restart issues
  • Not for industrial use

Buyer’s Guide For Best Plasma Cutter Under $1000

What type of metals can be suitable for Plasma Cutter?

This Plasma cutter covers almost a wide variety of metals like stainless steel, alloy steel, mild steel, copper, and aluminum. Aluminum is the one that requires alternate current and thus this welder supports an AC power source for efficient results.

This variety allows many customers to make plasma cutters their priority while opting for working in heavy industry. Above mentioned plasma cutters are one of the best cutters that have the ability to cut any metal with a fine cut and maximum performance.

How to use a Plasma Cutter with its best qualities?

Any machine usage is mostly dependent on the power source it offers and Plasma cutter AC and DC both phases. The amperage is set accordingly to the DC you want to receive. If you want to start with thin metals then go for low amperage, it will give you perfect results in no time.
For further more details the welder comes with a proper instructional manual that will guide you with each of its details and you can use it at its best. The more duty cycle gives liberty to the user to perform for more time.

Can this welder be changed to stick or TIG?

it is seen that mostly Plasma cutters do not offer you to select TIG or a stick. Some of the above-reviewed plasma cutters are the examples of best welders that can be used solely with the best features for long-term projects or for the heavy industry too.

How does the duty cycle work?

The duty cycle is a very significant feature in any machine so hold a greater position in the welder. Duty Cycle works with power sources. At low amperage, the duty cycle percentages increase and thus give the best quality work. It determines your work quality and efficiency. Highest the percentage of duty cycle higher the performance rate of this machine.

What type of projects it is best for?

it has the capacity to perform professional work and personal work very well. Some of them are not very suitable for heavy-duty work so in case you can go for light-duty welders too. It can perform with both thin metals and others too. These welders mostly come with 3 years above warranty so ensures you the reliability anticipatory.

What are the safety measures to consider in the welder?

Safety is one of the most important factors while the welding process. To have a safe and protected welder you have to look at its power source and heat setting quality. Also, consider some advanced cooling fans and compact size welders for better safety purposes.

There are some welders who offer welding helmets and masks along with their machines. It would be appropriate to go with a welder that gives maximum safety measures and assure its guarantee.

What are the basic needs to get started with welding?

Firstly you have to decide your welding type which you are going to buy and work with. You have to consider three basic things while choosing a welder that may be able to handle metal types, what kind of project you are working on, and your budget especially.

For indoors and small duty projects have different kinds of welders with limited power source and duty cycle. For bigger projects, some professional type of welder is needed. Above mentioned machines are offered for newbies and small project handlers so make your choice well while buying it.

Is cheap welder consists of low-quality material?

It is not necessary that reasonable welder has possibly some default or have been made up of poor quality material, but have some limited number of features that could have added in the other high priced welder, but the performance can be similar of both.

We have the best plasma cutter under $1000 reviewed low-priced welders like ARC STICK WELDER, 115 VOLT but it does not mean that it has some damaged property. It has a variety of useful features with a good looking body. Some people may offer low-quality machines but always look for their features and warranty details. You will replace it easily if you have some uncertainties about taken a welder.


Although there are varieties of best plasma cutter under $1000 LOTOS LTP5000D 50AMP is believed to be the best in all. Its high voltage power and reliability make it prominent in the market. Whereas if you are conscious about your budget then you must go for REBOOT PLASMA CUTTER 50 AMP 1/2″ CLEAN CUT which guarantees you the reliability and durability of the TIG machine.

For newbies and hobbyists then RAZORWELD JRWPC45LT PLASMA CUTTER is best for performing light tasks.
We are hoping that you might have come to a decision after reading this best plasma cutter under $1000 article and if you have any queries left then feel free to ask anything in the comments. Thank you!